1543 subwoofer front view

12" 1243 Ultra Subwoofer

$369.00
Skip to product information
1543 subwoofer front view

12" 1243 Ultra Subwoofer

$369.00

Build your next custom bass setup around the TrueBass TBS 1243 DV Ultra 12-inch subwoofer. With a 3-inch voice-coil inside diameter, dual 4-ohm voice coils and power handling of 600 watts RMS / 1,400 watts peak, this standalone ULTRA-series driver gives you a defined starting point for planning your enclosure, amplifier and wiring.

Picture your favorite tracks with a dedicated 12-inch woofer handling the low end. Whether you are replacing a driver or starting a fresh build, begin with your available space and plan the enclosure and amplification together. Sold individually without an enclosure.

Driver Size & Model

Nominal 12-inch subwoofer. TrueBass ULTRA series, TBS 1243 DV Ultra.

Voice-Coil Inside Diameter

3 inches.

Impedance

Dual voice coils: 4 ohms per coil (4 / 4 ohms). Final wired impedance depends on your wiring configuration. Match it to your amplifier's supported load.

Power Handling (RMS / Peak)

600 watts RMS / 1,400 watts peak per subwoofer. Use the RMS rating when planning compatible amplification; peak handling is not a continuous-power rating.

Woofer & Magnet Weight

Total woofer weight: 21 lbs, including the magnet. Magnet weight: 180 oz per woofer (one 180 oz magnet). The magnet is included in the total woofer weight, not added on top. Packed shipping weight: 22 lbs.

What's Included

One standalone subwoofer. Enclosure not included.

Enclosure Planning

The existing dual 12-inch system uses a complete enclosure measuring 32 inches wide × 16 inches high × 14 inches deep, with 3.2 cu. ft. gross internal volume before woofer and port deductions. These are complete two-woofer box specifications, not dimensions or a recommended enclosure volume for this individual driver.

Before You Order

  • Confirm mounting depth and cutout dimensions rather than relying on nominal driver size alone.
  • Request recommended single-driver enclosure volume, enclosure type and tuning before building your box.
  • Match your amplifier to the RMS power rating and final wired impedance.

Contact TrueBass Solutions with your vehicle details, available enclosure space and amplifier information for help planning your setup.

You may also like