Single 10" Standard Vehicle System - 1-TBS 1042 DV

Build a dedicated bass setup around the TrueBass Solutions Single 10" Standard Vehicle System, featuring one TBS 1042 DV woofer. Its enclosure measures 21.5" wide × 13.5" high × 15" deep, giving you a clear footprint to compare with your vehicle's available installation space.

Whether you are refreshing your daily driver's audio or putting together a new build, this single-woofer configuration gives the low end of your music its own place in your system. Rear-mounted binding posts provide wiring access. Start with fit and compatible amplification, then plan placement and wiring using the specifications below.

Woofer:

• One TBS 1042 DV 10" woofer

Voice Coil:

• Voice-coil inside diameter: 2 inches per woofer.

Woofer & Magnet Weight:

• Total woofer weight: 8 lbs, including the magnet.
• Magnet weight: 80 oz per woofer (1 × 80 oz magnet). These component weights are included in the total finished product weight below, not added on top.

Impedance:

• 4 / 4 Ω

Power Handling (RMS / Peak):

• 300 watts RMS / 600 watts peak
• Use the RMS rating when planning compatible amplification; peak handling is not a continuous-power rating.

Total Finished Product Weight:

• 42 lbs, including the enclosure, woofer, magnet, and hardware.

Dimensions:

• 21.5" wide × 13.5" high × 15" deep
• Allow clearance for rear wiring and secure mounting when checking fit.

Port:

• One round port, 3 inches in diameter × 9 inches long.

Internal Enclosure Volume:

• 1.88 cu. ft. gross internal volume, before woofer and port deductions.

Inputs & Wiring:

• Two pairs of heavy gold-plated binding posts positioned on the rear
• The existing specification lists configurations from 0.5 ohm mono up to two channels at 4.0 ohms each. Confirm the appropriate wiring for this woofer with TrueBass Solutions before installation.
• Match the final wiring impedance to your amplifier's supported load.

Enclosure Resonance:

• 34 Hz

Before You Order:

• Measure your planned mounting location and compare it with the full enclosure dimensions.
• Confirm amplifier compatibility with the power handling and intended wiring.
• Contact TrueBass Solutions with your vehicle details, available space and amplifier information if you need help planning your setup.