Single 10" Large Truck System TBS 1042 DV

Give your truck audio build a dedicated low-end foundation with the TrueBass Solutions Single 10" Large Truck System, featuring one TBS 1042 DV woofer. With 300 watts RMS and 600 watts peak power handling, this single-woofer system provides a clearly specified starting point for choosing compatible amplification.

Imagine settling into your pickup for a drive with a system planned around your music and your available space. The enclosure's wide, tapered profile measures 8" deep at the bottom and 4" at the top, while rear-mounted binding posts provide wiring access. Check the full dimensions and electrical requirements below before planning your installation.

Woofer:

• One TBS 1042 DV 10" woofer

Voice Coil:

• Voice-coil inside diameter: 2 inches per woofer.

Woofer & Magnet Weight:

• Total woofer weight: 8 lbs, including the magnet.
• Magnet weight: 80 oz per woofer (1 × 80 oz magnet). These component weights are included in the total finished product weight below, not added on top.

Impedance:

• 4 / 4 Ω

Power Handling (RMS / Peak):

• 300 / 600 watts
• Use the RMS rating when selecting compatible amplification. Peak handling is not a continuous-power rating.

Total Finished Product Weight:

• 52 lbs, including the enclosure, woofer, magnet, and hardware.

Dimensions:

• 49" wide × 15" high × 8" bottom depth × 4" top depth
• Measure both the upper and lower clearance in your planned mounting location, allowing space for wiring.

Internal Enclosure Volume:

• 1.67 cu. ft. gross internal volume, before woofer and port deductions.

Inputs & Wiring:

• Two pairs of heavy gold-plated binding posts positioned on the rear
• The existing specification lists configurations from 1.0 ohm mono up to two channels at 4.0 ohms each. Confirm the appropriate wiring for this woofer with TrueBass Solutions before installation.
• Match the final wiring impedance to your amplifier's supported load.

Decibel Output:

• The existing specification notes the potential to exceed 146 dB in many pickup trucks. Actual output depends on the vehicle, amplification, installation and testing conditions; this is not a guaranteed result.

Enclosure Resonance:

• 38 Hz

Before You Order:

• Compare the enclosure dimensions with your truck's available installation space.
• Confirm amplifier compatibility with the power handling and intended wiring configuration.
• Contact TrueBass Solutions with your vehicle details, available space and amplifier information if you need help planning your setup.