Single 10 inch Large Truck System speaker enclosure on an off-white background, without truck

Single 10" Large Truck System TBS 1041.5 DV

$399.00
Skip to product information
Single 10 inch Large Truck System speaker enclosure on an off-white background, without truck

Single 10" Large Truck System TBS 1041.5 DV

$399.00

Plan a dedicated bass upgrade for your pickup with the TrueBass Solutions Single 10" Large Truck System, featuring one TBS 1041.5 DV woofer. Its 49"-wide enclosure has a tapered profile, measuring 8" deep at the bottom and 4" at the top, so you can check the fit before building the rest of your system around it.

From your daily commute to a weekend drive, a dedicated subwoofer gives the low end of your music its own place in your audio setup. This single-woofer system provides a clearly specified option for a truck installation, with rear-mounted binding posts for wiring access. Use the dimensions, power ratings and impedance information below to plan compatible amplification and placement.

Woofer:

  • One TBS 1041.5 DV 10" woofer

Voice-Coil Inside Diameter:

  • 1.5 inches

Woofer & Magnet Weight:

  • Total woofer weight: 5.5 lbs, including the magnet.
  • Magnet weight: 40 oz per woofer (1 × 40 oz magnet). These component weights are included in the total system weight below, not added on top.

Impedance:

  • 4 / 4 Ω

Power Handling (RMS / Peak):

  • 175 / 350 watts
  • Use the RMS rating when planning compatible amplification; peak handling is not a continuous-power rating.

Total System Weight:

  • 50 lbs, including the enclosure, woofer, magnet, and hardware.

Dimensions:

  • 49" wide × 15" high × 8" bottom depth × 4" top depth
  • Check both top and bottom clearance in your planned mounting location, allowing room for wiring.

Internal Enclosure Volume:

  • 1.67 cu. ft. gross internal volume, before woofer and port deductions.

Inputs & Wiring:

  • Two pairs of heavy gold-plated binding posts positioned on the rear
  • The existing specification lists configurations from 1.0 ohm mono up to two channels at 4.0 ohms each. Confirm the appropriate wiring for this woofer with TrueBass Solutions before installation.
  • Match the final wiring impedance to your amplifier's supported load.

Decibel Output:

  • The existing specification notes the potential to exceed 146 dB in many pickup trucks. Actual output depends on the vehicle, amplification, installation and testing conditions; this is not a guaranteed result.

Enclosure Resonance:

  • 38 Hz

Before You Order:

  • Measure your available space and compare it with the full enclosure dimensions.
  • Confirm amplifier compatibility and the intended wiring configuration.
  • For help choosing a system, contact TrueBass Solutions with your vehicle details, available space and amplifier information.

You may also like