Single 10" Large Truck System TBS 1021.5 DV

Build your pickup's bass setup around the TrueBass Solutions Single 10" Large Truck System, featuring one TBS 1021.5 DV woofer. Its wide, tapered enclosure gives you a single-woofer option with clearly listed dimensions for planning your truck installation.

Picture your next drive with a dedicated subwoofer handling the low end of your music. Start by checking the available space, then choose compatible amplification and wiring. The rear-mounted binding posts and specifications below help you plan those details before ordering.

Woofer:

• One TBS 1021.5 DV 10" woofer

Voice Coil:

• Voice-coil inside diameter: 1.5 inches per woofer.

Driver Sensitivity:

• 95 dB at 1 watt/1 meter.

Driver Fs:

• Free-air resonance frequency (Fs): 38 Hz for the TBS 1021.5DV driver. This is a driver parameter, separate from enclosure resonance or tuning.

Driver Parameters:

• Qms: 4.62.
• Qes: 0.46.
• Qt: 0.42.
• Vas: 1.8 cu. ft. This is a driver parameter, not the internal enclosure volume.

Woofer & Magnet Weight:

• Total woofer weight: 5.5 lbs, including the magnet.
• Magnet weight: 40 oz per woofer (1 × 40 oz magnet). These component weights are included in the total finished product weight below, not added on top.

Impedance:

• 2 / 2 Ω

Power Handling (RMS / Peak):

• 200 watts RMS / 400 watts peak per woofer.

Total Finished Product Weight:

• 50 lbs, including the enclosure, woofer, magnet, and hardware.

Dimensions:

• 49" wide × 15" high × 8" bottom depth × 4" top depth
• The tapered profile is deeper at the bottom than at the top. Check both measurements against your available space.

Internal Enclosure Volume:

• 1.6 cu. ft. gross internal volume, before woofer and port deductions.

Inputs & Wiring:

• Two pairs of heavy gold-plated binding posts positioned on the rear allow the user to configure impedances ranging from 1.0 ohm mono up to two channels at 4.0 ohms each.
• Match the final impedance to your amplifier's supported load.

Decibel Output:

• The existing specification notes the potential to exceed 146 dB in many pickup trucks. Actual output depends on the vehicle, amplification, installation and testing conditions; this is not a guaranteed result.

Enclosure Resonance:

• 38 Hz

System F3:

• 33 Hz, separate from driver Fs and enclosure resonance.

Before You Order:

• Measure your planned mounting location and allow clearance for wiring and installation.
• Confirm amplifier compatibility with the woofer's power handling and intended wiring.
• Contact TrueBass Solutions with your vehicle details and available space if you need help selecting a system.