Dual 10-inch TBS 1041.5 DV background cleanup

Dual 10" Large Vehicle System - 2-TBS 1041.5 DV

$390.00
Skip to product information
Dual 10-inch TBS 1041.5 DV background cleanup

Dual 10" Large Vehicle System - 2-TBS 1041.5 DV

$390.00

Give your vehicle's audio build a dedicated dual-woofer foundation with the TrueBass Solutions Dual 10" Large Vehicle System, featuring two TBS 1041.5 DV woofers. The enclosure measures 28" wide × 15" high × 20.5" deep, giving you a clear starting point for checking fit and planning placement.

Whether you are refreshing your daily driver's sound or assembling a new setup, this system puts two 10" woofers together in one enclosure. Four pairs of rear-mounted binding posts provide access for wiring. Plan the installation around your available space and compatible amplification so every part of the build works together.

Woofers:

  • Two TBS 1041.5 DV 10" woofers

Voice Coil:

  • Voice-coil inside diameter: 1.5 inches per woofer.

Woofer & Magnet Weight:

  • Total woofer weight: 5.5 lbs per woofer, including its magnet.
  • Magnet weight: 40 oz per woofer (1 × 40 oz magnet per woofer). Both woofers and their magnets are included in the total finished product weight below, not added on top.

Impedance:

  • 4 / 4 Ω

Power Handling (RMS / Peak):

  • 350 watts RMS / 700 watts peak for the complete two-woofer system, not per woofer.

Total Finished Product Weight:

  • 67 lbs, including the enclosure, woofers, magnets, and hardware.

Dimensions:

  • 28" wide × 15" high × 20.5" deep
  • Allow clearance for rear wiring and secure mounting when checking your installation space.

Ports:

  • Two slotted ports.

Internal Enclosure Volume:

  • 3.93 cu. ft. gross internal volume for the complete enclosure, before woofer and port deductions.

Inputs & Wiring:

  • Four pairs of heavy gold-plated binding posts positioned on the rear
  • The existing specification lists configurations from 0.5 ohm mono up to four channels at 4.0 ohms each. Confirm the appropriate configuration for these woofers before installation.
  • Match the final wiring impedance to your amplifier's supported load.

Enclosure Resonance:

  • 34 Hz

Before You Order:

  • Compare the full enclosure dimensions with your vehicle's available space.
  • Confirm power handling and wiring requirements before choosing your amplifier.
  • Contact TrueBass Solutions with your vehicle details, available space and amplifier information for help planning your setup.

You may also like