{"title":"Loaded Subwoofer Enclosures","description":"\u003cp\u003eExplore TrueBass enclosures with subwoofers included for truck, SUV, and other vehicle audio builds. Compare system configurations and check fit and amplifier compatibility before ordering.\u003c\/p\u003e","products":[{"product_id":"dual-8-large-truck-system","title":"Dual 8\" Large Truck System","description":"\u003cp\u003eGive your pickup's audio build a dedicated bass foundation with the TrueBass Solutions Dual 8\" Large Truck System. This enclosure pairs two TBS 842 DV woofers with a tapered profile measuring 8\" deep at the bottom and 4\" at the top, giving you clear measurements to plan your installation.\u003c\/p\u003e\u003cp\u003eWhether you are putting together your first truck system or reworking an existing setup, start with fit and amplifier matching. The rear binding posts provide access for wiring, with the configuration options listed below to help you plan the rest of your system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo TBS 842 DV 8\" woofers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Fs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFree-air resonance frequency (Fs): 42 Hz per TBS 842DV driver. This is a driver parameter, separate from enclosure resonance or tuning.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 8 lbs per woofer, including its magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 80 oz per woofer (1 × 80 oz magnet per woofer). Both woofers and their magnets are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBox Impedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 \/ 2 ohms.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e500 watts RMS \/ 1,000 watts peak for the complete two-woofer system, not per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e68 lbs, including the enclosure, woofers, magnets, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e49\" wide × 15\" high × 8\" bottom depth × 4\" top depth\u003c\/li\u003e\n\u003cli\u003eMeasure the available installation space and allow clearance for wiring before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.67 cu. ft. gross internal volume for the complete enclosure, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pairs of heavy gold-plated binding posts positioned on the rear\u003c\/li\u003e\n\u003cli\u003eListed wiring configurations range from 2 ohms mono to two channels at 2 ohms each.\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring configuration to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDecibel Output:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe existing product specification notes the potential to exceed 146 dB in many pickup trucks. Actual output depends on the vehicle, amplification, installation and testing conditions; this is not a guaranteed result.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e42 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConfirm the enclosure dimensions suit your truck and planned mounting location.\u003c\/li\u003e\n\u003cli\u003eCheck amplifier compatibility and wiring requirements for your installation.\u003c\/li\u003e\n\u003cli\u003eNeed help planning your setup? Contact TrueBass Solutions with your vehicle details and available space.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371270934626,"sku":"DUAL8LG","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/image.png?v=1790789872"},{"product_id":"single-10-large-truck-system","title":"Single 10\" Large Truck System TBS 1021.5 DV","description":"\u003cp\u003eBuild your pickup's bass setup around the TrueBass Solutions Single 10\" Large Truck System, featuring one TBS 1021.5 DV woofer. Its wide, tapered enclosure gives you a single-woofer option with clearly listed dimensions for planning your truck installation.\u003c\/p\u003e\u003cp\u003ePicture your next drive with a dedicated subwoofer handling the low end of your music. Start by checking the available space, then choose compatible amplification and wiring. The rear-mounted binding posts and specifications below help you plan those details before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofer:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne TBS 1021.5 DV 10\" woofer\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice Coil:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVoice-coil inside diameter: 1.5 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Sensitivity:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e95 dB at 1 watt\/1 meter.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Fs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFree-air resonance frequency (Fs): 38 Hz for the TBS 1021.5DV driver. This is a driver parameter, separate from enclosure resonance or tuning.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Parameters:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eQms: 4.62.\u003c\/li\u003e\n\u003cli\u003eQes: 0.46.\u003c\/li\u003e\n\u003cli\u003eQt: 0.42.\u003c\/li\u003e\n\u003cli\u003eVas: 1.8 cu. ft. This is a driver parameter, not the internal enclosure volume.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 5.5 lbs, including the magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 40 oz per woofer (1 × 40 oz magnet). These component weights are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 \/ 2 Ω\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e200 watts RMS \/ 400 watts peak per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e50 lbs, including the enclosure, woofer, magnet, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e49\" wide × 15\" high × 8\" bottom depth × 4\" top depth\u003c\/li\u003e\n\u003cli\u003eThe tapered profile is deeper at the bottom than at the top. Check both measurements against your available space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.6 cu. ft. gross internal volume, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pairs of heavy gold-plated binding posts positioned on the rear allow the user to configure impedances ranging from 1.0 ohm mono up to two channels at 4.0 ohms each.\u003c\/li\u003e\n\u003cli\u003eMatch the final impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDecibel Output:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe existing specification notes the potential to exceed 146 dB in many pickup trucks. Actual output depends on the vehicle, amplification, installation and testing conditions; this is not a guaranteed result.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e38 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSystem F3:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e33 Hz, separate from driver Fs and enclosure resonance.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasure your planned mounting location and allow clearance for wiring and installation.\u003c\/li\u003e\n\u003cli\u003eConfirm amplifier compatibility with the woofer's power handling and intended wiring.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details and available space if you need help selecting a system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371271458914,"sku":"SING1021.5LG","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/image_4af45a28-0c48-42f7-b7e6-97933b0af5ec.png?v=1790790014"},{"product_id":"single-10-large-truck-system-tbs-1041-5-dv","title":"Single 10\" Large Truck System TBS 1041.5 DV","description":"\u003cp\u003ePlan a dedicated bass upgrade for your pickup with the TrueBass Solutions Single 10\" Large Truck System, featuring one TBS 1041.5 DV woofer. Its 49\"-wide enclosure has a tapered profile, measuring 8\" deep at the bottom and 4\" at the top, so you can check the fit before building the rest of your system around it.\u003c\/p\u003e\u003cp\u003eFrom your daily commute to a weekend drive, a dedicated subwoofer gives the low end of your music its own place in your audio setup. This single-woofer system provides a clearly specified option for a truck installation, with rear-mounted binding posts for wiring access. Use the dimensions, power ratings and impedance information below to plan compatible amplification and placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofer:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne TBS 1041.5 DV 10\" woofer\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.5 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 5.5 lbs, including the magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 40 oz per woofer (1 × 40 oz magnet). These component weights are included in the total system weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e4 \/ 4 Ω\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e175 \/ 350 watts\u003c\/li\u003e\n\u003cli\u003eUse the RMS rating when planning compatible amplification; peak handling is not a continuous-power rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal System Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e50 lbs, including the enclosure, woofer, magnet, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e49\" wide × 15\" high × 8\" bottom depth × 4\" top depth\u003c\/li\u003e\n\u003cli\u003eCheck both top and bottom clearance in your planned mounting location, allowing room for wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.67 cu. ft. gross internal volume, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pairs of heavy gold-plated binding posts positioned on the rear\u003c\/li\u003e\n\u003cli\u003eThe existing specification lists configurations from 1.0 ohm mono up to two channels at 4.0 ohms each. Confirm the appropriate wiring for this woofer with TrueBass Solutions before installation.\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDecibel Output:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe existing specification notes the potential to exceed 146 dB in many pickup trucks. Actual output depends on the vehicle, amplification, installation and testing conditions; this is not a guaranteed result.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e38 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasure your available space and compare it with the full enclosure dimensions.\u003c\/li\u003e\n\u003cli\u003eConfirm amplifier compatibility and the intended wiring configuration.\u003c\/li\u003e\n\u003cli\u003eFor help choosing a system, contact TrueBass Solutions with your vehicle details, available space and amplifier information.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371271950434,"sku":"SING1041.5LG","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/image_4af45a28-0c48-42f7-b7e6-97933b0af5ec.png?v=1790790014"},{"product_id":"single-10-large-truck-system-tbs-1042-dv-copy","title":"Single 10\" Large Truck System TBS 1042 DV","description":"\u003cp\u003eGive your truck audio build a dedicated low-end foundation with the TrueBass Solutions Single 10\" Large Truck System, featuring one TBS 1042 DV woofer. With 300 watts RMS and 600 watts peak power handling, this single-woofer system provides a clearly specified starting point for choosing compatible amplification.\u003c\/p\u003e\u003cp\u003eImagine settling into your pickup for a drive with a system planned around your music and your available space. The enclosure's wide, tapered profile measures 8\" deep at the bottom and 4\" at the top, while rear-mounted binding posts provide wiring access. Check the full dimensions and electrical requirements below before planning your installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofer:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne TBS 1042 DV 10\" woofer\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice Coil:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVoice-coil inside diameter: 2 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 8 lbs, including the magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 80 oz per woofer (1 × 80 oz magnet). These component weights are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e4 \/ 4 Ω\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e300 \/ 600 watts\u003c\/li\u003e\n\u003cli\u003eUse the RMS rating when selecting compatible amplification. Peak handling is not a continuous-power rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e52 lbs, including the enclosure, woofer, magnet, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e49\" wide × 15\" high × 8\" bottom depth × 4\" top depth\u003c\/li\u003e\n\u003cli\u003eMeasure both the upper and lower clearance in your planned mounting location, allowing space for wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.67 cu. ft. gross internal volume, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pairs of heavy gold-plated binding posts positioned on the rear\u003c\/li\u003e\n\u003cli\u003eThe existing specification lists configurations from 1.0 ohm mono up to two channels at 4.0 ohms each. Confirm the appropriate wiring for this woofer with TrueBass Solutions before installation.\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDecibel Output:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe existing specification notes the potential to exceed 146 dB in many pickup trucks. Actual output depends on the vehicle, amplification, installation and testing conditions; this is not a guaranteed result.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e38 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompare the enclosure dimensions with your truck's available installation space.\u003c\/li\u003e\n\u003cli\u003eConfirm amplifier compatibility with the power handling and intended wiring configuration.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space and amplifier information if you need help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371272540258,"sku":"SING1042LG","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/image_4af45a28-0c48-42f7-b7e6-97933b0af5ec.png?v=1790790014"},{"product_id":"small-truck-amp-suv-system","title":"Car or SUV System","description":"\u003cp\u003ePlan a bass upgrade around the space you have with the TrueBass Solutions Car or SUV System. Featuring one TBS 842 DV 8\" woofer and one round port, this system brings a single-woofer layout together in an enclosure measuring 24 × 10 × 14 inches.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing your daily driver's audio or building a new setup, compare the enclosure dimensions with your available vehicle space, then choose compatible amplification and wiring for a system planned around your listening needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofer:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne TBS 842 DV 8\" woofer\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Fs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFree-air resonance frequency (Fs): 42 Hz for the TBS 842DV driver. This is a driver parameter, separate from enclosure resonance or tuning.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e4 \/ 4 Ω\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e250 \/ 500 watts\u003c\/li\u003e\n\u003cli\u003eUse the RMS rating when planning compatible amplification; peak handling is not a continuous-power rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e40 lbs\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne round port, 3 inches in diameter × 9 inches long.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOutside Enclosure Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24 × 10 × 14 inches.\u003c\/li\u003e\n\u003cli\u003eAllow space for wiring and installation when checking fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pairs of heavy gold-plated binding posts positioned on the rear\u003c\/li\u003e\n\u003cli\u003eListed wiring options: 2.0 ohms mono or 4.0 ohms stereo\u003c\/li\u003e\n\u003cli\u003eConfirm the appropriate configuration for your amplifier and match the final impedance to its supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDecibel Output:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe existing specification notes the potential to exceed 140 dB in many standard-cab pickup trucks. Actual output depends on the vehicle, amplification, installation and testing conditions; this is not a guaranteed result.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e38 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasure your available installation space and compare it with the full enclosure dimensions.\u003c\/li\u003e\n\u003cli\u003eConfirm amplifier compatibility with the power handling and intended wiring.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space and amplifier information if you need help selecting a system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371274113122,"sku":"SMTRUCK","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/image_f2691f16-d524-4bc7-afff-2afd58e0bc4e.png?v=1790790541"},{"product_id":"dual-10-large-vehicle-system-2-tbs-1021-5-dv","title":"Dual 10\" Vehicle System - 2-TBS 1021.5 DV","description":"\u003cp\u003eBuild your vehicle's bass setup around two 10\" woofers with the TrueBass Solutions Dual 10\" Vehicle System. This configuration features two TBS 1021.5 DV woofers in an enclosure measuring 28\" wide, 15\" high and 20.5\" deep, giving you clear dimensions to plan your installation.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing an existing audio build or starting from scratch, this dual-woofer layout gives the low end of your music a dedicated place in your system. Four pairs of rear-mounted binding posts provide wiring access. Check your available space, amplifier compatibility and intended wiring before ordering so the system fits your installation plan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo TBS 1021.5 DV 10\" woofers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice Coil:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVoice-coil inside diameter: 1.5 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Fs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFree-air resonance frequency (Fs): 33 Hz per TBS 1021.5DV driver. This is a driver parameter, separate from enclosure resonance or tuning.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 5.5 lbs per woofer, including its magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 40 oz per woofer (1 × 40 oz magnet per woofer). Both woofers and their magnets are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 \/ 2 Ω\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e200 watts RMS \/ 500 watts peak per woofer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer Sensitivity:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e95 dB per driver\u003c\/li\u003e\n\u003cli\u003eThis is a driver sensitivity specification, not a measured maximum-output rating for the complete dual-woofer system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e67 lbs, including the enclosure, woofers, magnets, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e28\" wide × 15\" high × 20.5\" deep\u003c\/li\u003e\n\u003cli\u003eAllow clearance for rear wiring and secure mounting when checking fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo slotted ports.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3.93 cu. ft. gross internal volume for the complete enclosure, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour pairs of heavy gold-plated binding posts positioned on the rear\u003c\/li\u003e\n\u003cli\u003eThe existing specification lists configurations ranging from 0.5 ohm mono up to four channels at 4.0 ohms each. Confirm the appropriate configuration for these woofers before installation.\u003c\/li\u003e\n\u003cli\u003eUse only a wiring configuration supported by your amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e34 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompare the full enclosure dimensions with your vehicle's available space.\u003c\/li\u003e\n\u003cli\u003eConfirm power handling and final wiring impedance before choosing an amplifier.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371289350242,"sku":"DUAL1021.5LG","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/Dual-10-1021-5-clean-1131.png?v=1791563536"},{"product_id":"dual-10-large-vehicle-system-2-tbs-1041-5-dv","title":"Dual 10\" Large Vehicle System - 2-TBS 1041.5 DV","description":"\u003cp\u003eGive your vehicle's audio build a dedicated dual-woofer foundation with the TrueBass Solutions Dual 10\" Large Vehicle System, featuring two TBS 1041.5 DV woofers. The enclosure measures 28\" wide × 15\" high × 20.5\" deep, giving you a clear starting point for checking fit and planning placement.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing your daily driver's sound or assembling a new setup, this system puts two 10\" woofers together in one enclosure. Four pairs of rear-mounted binding posts provide access for wiring. Plan the installation around your available space and compatible amplification so every part of the build works together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo TBS 1041.5 DV 10\" woofers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice Coil:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVoice-coil inside diameter: 1.5 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 5.5 lbs per woofer, including its magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 40 oz per woofer (1 × 40 oz magnet per woofer). Both woofers and their magnets are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e4 \/ 4 Ω\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e350 watts RMS \/ 700 watts peak for the complete two-woofer system, not per woofer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e67 lbs, including the enclosure, woofers, magnets, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e28\" wide × 15\" high × 20.5\" deep\u003c\/li\u003e\n\u003cli\u003eAllow clearance for rear wiring and secure mounting when checking your installation space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo slotted ports.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3.93 cu. ft. gross internal volume for the complete enclosure, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour pairs of heavy gold-plated binding posts positioned on the rear\u003c\/li\u003e\n\u003cli\u003eThe existing specification lists configurations from 0.5 ohm mono up to four channels at 4.0 ohms each. Confirm the appropriate configuration for these woofers before installation.\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e34 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompare the full enclosure dimensions with your vehicle's available space.\u003c\/li\u003e\n\u003cli\u003eConfirm power handling and wiring requirements before choosing your amplifier.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371301113954,"sku":"DUAL1041.5LG","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/dual-10-inch-tbs-1041-5-dv-background-cleanup.png?v=1791563410"},{"product_id":"dual-10-large-vehicle-system-2-tbs-1042-dv","title":"Dual 10\" Large Vehicle System - 2-TBS 1042 DV","description":"\u003cp\u003eBuild your vehicle's bass setup around the TrueBass Solutions Dual 10\" Large Vehicle System, featuring two TBS 1042 DV woofers in one enclosure. Measuring 28\" wide × 15\" high × 20.5\" deep, this system gives you a clearly defined footprint for planning placement and checking fit.\u003c\/p\u003e\u003cp\u003eWhether you are putting together a new audio build or replacing an existing subwoofer setup, start with the space you have and the amplification you intend to use. This dual-10-inch configuration brings two woofers together, with four pairs of rear-mounted binding posts for wiring access. Use the specifications below to plan an installation around your vehicle and listening needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo TBS 1042 DV 10\" woofers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice Coil:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVoice-coil inside diameter: 2 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 8 lbs per woofer, including its magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 80 oz per woofer (1 × 80 oz magnet per woofer). Both woofers and their magnets are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e4 \/ 4 Ω\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e600 watts RMS \/ 1,200 watts peak for the complete two-woofer system, not per woofer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e72 lbs, including the enclosure, woofers, magnets, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e28\" wide × 15\" high × 20.5\" deep\u003c\/li\u003e\n\u003cli\u003eAllow clearance for rear wiring and secure mounting when checking fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo slotted ports.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3.93 cu. ft. gross internal volume for the complete enclosure, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour pairs of heavy gold-plated binding posts positioned on the rear\u003c\/li\u003e\n\u003cli\u003eThe existing specification lists configurations from 0.5 ohm mono up to four channels at 4.0 ohms each. Confirm the appropriate configuration for these woofers before installation.\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e34 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasure your available installation space and compare it with the full enclosure dimensions.\u003c\/li\u003e\n\u003cli\u003eConfirm power handling and final wiring requirements before choosing an amplifier.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space and amplifier information if you need help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371301179490,"sku":"DUAL1042LG","price":560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/Dual-10-1042-front-1da985b1.png?v=1791563316"},{"product_id":"dual-10-large-vehicle-system-2-tbs-1043-dv","title":"Dual 10\" Large Vehicle System - 2-TBS 1043 DV Ultra","description":"\u003cp\u003eBuild your vehicle's bass setup around two TBS 1043 DV Ultra 10\" woofers with the TrueBass Solutions Dual 10\" Large Vehicle System. This configuration brings both woofers together in an enclosure measuring 25\" wide × 15.5\" high × 20.5\" deep, giving you a clearly defined footprint for planning your installation.\u003c\/p\u003e\u003cp\u003ePicture your next drive with a dedicated dual-woofer setup handling the low end of your music. Whether you are starting a new build or reworking an existing system, begin with fit, amplifier matching and wiring. Two pairs of rear-mounted binding posts, configured to 2.0 ohms each, provide wiring access, while the specifications below help you plan the supporting equipment and mounting space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo TBS 1043 DV Ultra 10\" woofers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 20 lbs per woofer, including its magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 180 oz per woofer (1 × 180 oz magnet per woofer). Both woofers and their magnets are included in the system weight, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Specifications (per woofer):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSensitivity: 93 dB at 1 watt\/1 meter.\u003c\/li\u003e\n\u003cli\u003eFree-air resonance (Fs): 36 Hz.\u003c\/li\u003e\n\u003cli\u003eQms: 4.22.\u003c\/li\u003e\n\u003cli\u003eQes: 0.43.\u003c\/li\u003e\n\u003cli\u003eQt: 0.39.\u003c\/li\u003e\n\u003cli\u003eVas: 2.2 cu. ft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBox Impedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 \/ 2 ohms for the complete system.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1,200 watts RMS \/ 2,800 watts peak for the complete two-woofer system, not per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e95 lbs\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e25\" wide × 15.5\" high × 20.5\" deep\u003c\/li\u003e\n\u003cli\u003eAllow clearance for rear wiring and secure mounting when checking fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3 cu. ft. gross internal volume for the complete enclosure, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo slot ports.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pairs of heavy gold-plated binding posts positioned on the rear, configured to 2.0 ohms each.\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDecibel Output:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe existing specification notes the potential to exceed 160 dB in many vehicles with TBS 1043 DV Ultra woofers. Actual output depends on the vehicle, amplification, installation and testing conditions; this is not a guaranteed result.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e34 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSystem F3:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e36 Hz, separate from driver Fs and enclosure resonance.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompare the full enclosure dimensions with your vehicle's available installation space.\u003c\/li\u003e\n\u003cli\u003ePlan suitable handling and secure mounting for the 95 lb system.\u003c\/li\u003e\n\u003cli\u003eConfirm power handling and final wiring requirements before choosing an amplifier.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371301605474,"sku":"DUAL1043LG","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/dual-10-inch-large-vehicle-system-background-cleanup.png?v=1791563136"},{"product_id":"dual-8-compact-vehicle-system","title":"Dual 8\" Compact Vehicle System","description":"\u003cp\u003ePlan a dual-woofer bass upgrade with the TrueBass Solutions Dual 8\" Compact Vehicle System. Featuring two TBS 842 DV 8\" woofers, this system brings a pair of drivers together in an enclosure measuring 28\" wide × 14\" high × 10.5\" deep.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing your daily driver's audio or building a new setup, those dimensions give you a practical starting point for checking placement without overlooking the space needed for wiring. Picture your next drive with a dedicated system handling the low end of your music. Start with fit and compatible amplification, then use the rear-mounted binding posts to plan the appropriate wiring configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo TBS 842 DV 8\" woofers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Fs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFree-air resonance frequency (Fs): 42 Hz per TBS 842DV driver. This is a driver parameter, separate from enclosure resonance or tuning.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 8 lbs per woofer, including its magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 80 oz per woofer (1 × 80 oz magnet per woofer). Both woofers and their magnets are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBox Impedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 \/ 2 ohms.\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring configuration to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e500 watts RMS \/ 1,000 watts peak for the complete two-woofer system, not per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e58 lbs, including the enclosure, woofers, magnets, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e28\" wide × 14\" high × 10.5\" deep\u003c\/li\u003e\n\u003cli\u003eAllow clearance for rear wiring and secure mounting when checking your installation space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.73 cu. ft. gross internal volume for the complete enclosure, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo round ports, each 3 inches in diameter × 9 inches long.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour pairs of heavy gold-plated binding posts positioned on the rear\u003c\/li\u003e\n\u003cli\u003eThe existing specification lists configurations from 1.0 ohm mono up to four channels at 4.0 ohms each. Confirm the appropriate configuration for these woofers before installation.\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDecibel Output:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe existing specification notes the potential to exceed 145 dB in many vehicles. Actual output depends on the vehicle, amplification, installation and testing conditions; this is not a guaranteed result.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e38 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompare the full enclosure dimensions with your vehicle's available space.\u003c\/li\u003e\n\u003cli\u003eConfirm power handling and final wiring requirements before choosing an amplifier.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371304030306,"sku":"DUAL8COMP","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/dual-8-inch-compact-vehicle-system-background-cleanup.png?v=1791563019"},{"product_id":"single-10-standard-vehicle-system-1-tbs-1021-5-dv","title":"Single 10\" Standard Vehicle System - 1-TBS 1021.5 DV","description":"\u003cp\u003ePlan a single-woofer bass upgrade with the TrueBass Solutions Single 10\" Standard Vehicle System, featuring one TBS 1021.5 DV woofer. Its enclosure measures 21.5\" wide × 14\" high × 16.5\" deep, giving you clear dimensions to compare with your vehicle's available installation space.\u003c\/p\u003e\u003cp\u003eWhether you are building your first dedicated subwoofer setup or refreshing an existing system, this configuration puts a single 10\" woofer in an enclosure with rear-mounted binding posts for wiring access. Picture your next drive with the low end of your music handled by a dedicated part of your audio build. Start with fit and amplifier matching, then use the specifications below to plan the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofer:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne TBS 1021.5 DV 10\" woofer\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice Coil:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVoice-coil inside diameter: 1.5 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Fs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFree-air resonance frequency (Fs): 38 Hz for the TBS 1021.5DV driver. This is a driver parameter, separate from enclosure resonance or tuning.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Parameters:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eQms: 4.62.\u003c\/li\u003e\n\u003cli\u003eQes: 0.46.\u003c\/li\u003e\n\u003cli\u003eQt: 0.42.\u003c\/li\u003e\n\u003cli\u003eVas: 1.8 cu. ft. This is a driver parameter, not the internal enclosure volume.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 5.5 lbs, including the magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 40 oz per woofer (1 × 40 oz magnet). These component weights are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 \/ 2 Ω\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e200 \/ 400 watts\u003c\/li\u003e\n\u003cli\u003eUse the RMS rating when planning compatible amplification; peak handling is not a continuous-power rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer Sensitivity:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e95 dB at 1 watt\/1 meter per driver.\u003c\/li\u003e\n\u003cli\u003eThis is a driver sensitivity specification, not a measured maximum-output rating for the complete enclosure system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e40 lbs, including the enclosure, woofer, magnet, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e21.5\" wide × 14\" high × 16.5\" deep\u003c\/li\u003e\n\u003cli\u003eAllow clearance for rear wiring and secure mounting when checking fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2.17 cu. ft. gross internal volume, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne round port, 3 inches in diameter × 9 inches long.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pairs of heavy gold-plated binding posts positioned on the rear allow the user to configure impedances ranging from 0.5 ohm mono up to two channels at 4.0 ohms each.\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e34 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSystem F3:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e33 Hz, separate from driver Fs and enclosure resonance.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasure your available installation space and compare it with the full enclosure dimensions.\u003c\/li\u003e\n\u003cli\u003eConfirm amplifier compatibility with the power handling and intended wiring.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371314384994,"sku":"SING1021.5","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/Single-10-1021-5-DV-clean-3a5b6ddf_1.png?v=1791562920"},{"product_id":"single-10-standard-vehicle-system-1-tbs-1041-5-dv","title":"Single 10\" Standard Vehicle System - 1-TBS 1041.5 DV","description":"\u003cp\u003ePlan a dedicated bass upgrade with the TrueBass Solutions Single 10\" Standard Vehicle System, featuring one TBS 1041.5 DV woofer. Its enclosure measures 21.5\" wide × 13.5\" high × 15\" deep, giving you a clear footprint to compare with your vehicle's available space.\u003c\/p\u003e\u003cp\u003eWhether you are putting together your first subwoofer setup or refreshing an existing build, this single-10-inch configuration provides a defined starting point for fit and amplifier matching. Picture your next drive with a dedicated woofer handling the low end of your music. Rear-mounted binding posts provide wiring access, while the specifications below help you plan placement and compatible supporting equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofer:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne TBS 1041.5 DV 10\" woofer\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice Coil:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVoice-coil inside diameter: 1.5 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 5.5 lbs, including the magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 40 oz per woofer (1 × 40 oz magnet). These component weights are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e4 \/ 4 Ω\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e175 watts RMS \/ 350 watts peak\u003c\/li\u003e\n\u003cli\u003eUse the RMS rating when planning compatible amplification; peak handling is not a continuous-power rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e40 lbs, including the enclosure, woofer, magnet, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e21.5\" wide × 13.5\" high × 15\" deep\u003c\/li\u003e\n\u003cli\u003eAllow clearance for rear wiring and secure mounting when checking fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePort:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne round port, 3 inches in diameter × 9 inches long.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.88 cu. ft. gross internal volume, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pairs of heavy gold-plated binding posts positioned on the rear\u003c\/li\u003e\n\u003cli\u003eThe existing specification lists configurations from 0.5 ohm mono up to two channels at 4.0 ohms each. Confirm the appropriate wiring for this woofer with TrueBass Solutions before installation.\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e34 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasure your planned mounting location and compare it with the full enclosure dimensions.\u003c\/li\u003e\n\u003cli\u003eConfirm amplifier compatibility with the power handling and intended wiring.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space and amplifier information if you need help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371314417762,"sku":"SING1041.5","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/tbs-1041-5-dv-enclosure-background-cleanup.png?v=1791562768"},{"product_id":"single-10-standard-vehicle-system-1-tbs-1042-dv","title":"Single 10\" Standard Vehicle System - 1-TBS 1042 DV","description":"\u003cp\u003eBuild a dedicated bass setup around the TrueBass Solutions Single 10\" Standard Vehicle System, featuring one TBS 1042 DV woofer. Its enclosure measures 21.5\" wide × 13.5\" high × 15\" deep, giving you a clear footprint to compare with your vehicle's available installation space.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing your daily driver's audio or putting together a new build, this single-woofer configuration gives the low end of your music its own place in your system. Rear-mounted binding posts provide wiring access. Start with fit and compatible amplification, then plan placement and wiring using the specifications below.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofer:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne TBS 1042 DV 10\" woofer\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice Coil:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVoice-coil inside diameter: 2 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 8 lbs, including the magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 80 oz per woofer (1 × 80 oz magnet). These component weights are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e4 \/ 4 Ω\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e300 watts RMS \/ 600 watts peak\u003c\/li\u003e\n\u003cli\u003eUse the RMS rating when planning compatible amplification; peak handling is not a continuous-power rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e42 lbs, including the enclosure, woofer, magnet, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e21.5\" wide × 13.5\" high × 15\" deep\u003c\/li\u003e\n\u003cli\u003eAllow clearance for rear wiring and secure mounting when checking fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePort:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne round port, 3 inches in diameter × 9 inches long.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.88 cu. ft. gross internal volume, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pairs of heavy gold-plated binding posts positioned on the rear\u003c\/li\u003e\n\u003cli\u003eThe existing specification lists configurations from 0.5 ohm mono up to two channels at 4.0 ohms each. Confirm the appropriate wiring for this woofer with TrueBass Solutions before installation.\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e34 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasure your planned mounting location and compare it with the full enclosure dimensions.\u003c\/li\u003e\n\u003cli\u003eConfirm amplifier compatibility with the power handling and intended wiring.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space and amplifier information if you need help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371314450530,"sku":"SING1042","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/tbs-1042-dv-enclosure-background-cleanup.png?v=1791562651"},{"product_id":"single-10-standard-vehicle-system-1-tbs-1043-dv","title":"Single 10\" Standard Vehicle System - 1-TBS 1043 DV Ultra","description":"\u003cp\u003ePlan your next bass build around the TrueBass Solutions Single 10\" Standard Vehicle System, featuring one TBS 1043 DV Ultra woofer. With listed power handling of 600 watts RMS and 1400 watts peak, this configuration gives you a defined starting point for selecting compatible amplification.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing an existing setup or building a dedicated subwoofer system for your daily driver, start with the space you have. The enclosure measures 21.5\" wide × 13.5\" high × 15\" deep, with rear-mounted binding posts for wiring access. Picture your next drive with a dedicated woofer handling the low end of your music, supported by an installation planned around fit, wiring and amplifier compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofer:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne TBS 1043 DV Ultra 10\" woofer\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3 inches.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Sensitivity:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e93 dB at 1 watt\/1 meter.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Fs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFree-air resonance frequency (Fs): 36 Hz. This is a driver parameter, separate from enclosure resonance.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Parameters:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eQms: 4.22.\u003c\/li\u003e\n\u003cli\u003eQes: 0.43.\u003c\/li\u003e\n\u003cli\u003eQt: 0.39.\u003c\/li\u003e\n\u003cli\u003eVas: 2.2 cu. ft. This is a driver parameter, not the internal enclosure volume.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 20 lbs, including the magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 180 oz per woofer (1 × 180 oz magnet). These component weights are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBox Impedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e4 \/ 4 Ω\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e600 \/ 1400 watts\u003c\/li\u003e\n\u003cli\u003eUse the RMS rating when planning compatible amplification; peak handling is not a continuous-power rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e64 lbs, including the enclosure, woofer, magnet, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e21.5\" wide × 13.5\" high × 15\" deep\u003c\/li\u003e\n\u003cli\u003eAllow clearance for rear wiring and secure mounting when checking fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.5 cu. ft. gross internal volume, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne round port, 3 inches in diameter × 9 inches long.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pairs of heavy gold-plated binding posts positioned on the rear, configured to 4 ohms each (4 \/ 4 ohms).\u003c\/li\u003e\n\u003cli\u003eMatch the final wiring impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e34 Hz\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSystem F3:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e36 Hz, separate from driver Fs and enclosure resonance.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasure your planned mounting location and compare it with the full enclosure dimensions.\u003c\/li\u003e\n\u003cli\u003ePlan secure mounting and suitable handling for the 64 lb system.\u003c\/li\u003e\n\u003cli\u003eConfirm amplifier compatibility with the power handling and intended wiring.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space and amplifier information if you need help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371314647138,"sku":"SING1043","price":380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/single-10-inch-standard-vehicle-enclosure-background-cleanup.png?v=1791562539"},{"product_id":"small-truck-suv-compact-system","title":"Small Truck \u0026 SUV Compact System","description":"\u003cp\u003ePlan a dedicated bass upgrade around your available space with the TrueBass Solutions Small Truck \u0026amp; SUV Compact System. Featuring one TBS 842 DV 8-inch woofer and two 8-inch Helmholtz resonators, this system brings a single-woofer configuration together in a tapered enclosure.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing your daily driver's audio or starting a new build, the enclosure's 34.5-inch width and tapered depth give you clear measurements to work with. Picture your next drive with a dedicated woofer handling the low end of your music, then plan fit, amplification, and wiring around your vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofer\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne TBS 842 DV 8-inch woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 inches.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Fs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFree-air resonance frequency (Fs): 42 Hz for the TBS 842DV driver. This is a driver parameter, separate from enclosure resonance or tuning.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 8 lbs, including the magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 80 oz per woofer (1 × 80 oz magnet). These component weights are included in the total finished product weight below, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBox Impedance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4 \/ 4 ohms.\u003c\/li\u003e\n\u003cli\u003eConfirm the final wiring configuration and amplifier compatibility before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak)\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRMS power handling: 250 watts.\u003c\/li\u003e\n\u003cli\u003ePeak power handling: 500 watts.\u003c\/li\u003e\n\u003cli\u003eUse the RMS rating when planning compatible amplification; peak handling is not a continuous-power rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e40 lbs, including the enclosure, woofer, magnet, resonators, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdditional Components\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo 8-inch Helmholtz resonators.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e34.5 inches wide × 14 inches high × 6.5 inches bottom depth × 4 inches top depth.\u003c\/li\u003e\n\u003cli\u003eCheck both top and bottom clearance in your planned mounting location, allowing room for wiring and secure installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInputs \u0026amp; Wiring\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pairs of heavy gold-plated binding posts positioned on the rear.\u003c\/li\u003e\n\u003cli\u003eThe existing listing gives wiring options of 2.0 ohms mono or 4.0 ohms stereo. Confirm the intended wiring configuration before installation.\u003c\/li\u003e\n\u003cli\u003eMatch the confirmed final wiring impedance to your amplifier's supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Resonance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e38 Hz.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompare the full enclosure dimensions with your truck or SUV's available installation space.\u003c\/li\u003e\n\u003cli\u003ePlan suitable handling and secure mounting for the 40 lb system.\u003c\/li\u003e\n\u003cli\u003eConfirm the wiring configuration and amplifier compatibility before installation.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space, and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42371327361122,"sku":"SMTRUCKCOM","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/small-truck-and-suv-enclosure-background-cleanup.png?v=1791562400"},{"product_id":"triple-8-ultra","title":"Triple 8\" ultra","description":"\u003cp\u003eBring a three-woofer layout to your next audio build with the TrueBass Solutions Triple 8\" Ultra. This system features three TBS 842 DV Ultra 8\" subwoofers in an enclosure with one slotted port and a listed tuning frequency of 33 Hz.\u003c\/p\u003e\u003cp\u003eWhether you are planning a new setup or replacing an existing system, the Triple 8\" Ultra gives you a multi-woofer configuration to build around. Picture your favorite tracks with a dedicated system handling the low end, then plan the supporting amplification, wiring and installation space before ordering. The listed 2.66-ohm impedance is an important starting point for checking amplifier compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThree TBS 842 DV Ultra 8\" subwoofers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 12 lbs per woofer, including its magnets.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 160 oz per woofer (2 × 80 oz magnets per woofer). The magnets are included in each woofer's weight, not added on top. These are component weights, not the total enclosure-system weight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eListed system impedance: 2.66 ohms\u003c\/li\u003e\n\u003cli\u003eConfirm amplifier compatibility with the intended wiring configuration before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e900 watts RMS \/ 1,800 watts peak for the complete three-woofer system, not per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts \u0026amp; Tuning:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne slotted port.\u003c\/li\u003e\n\u003cli\u003ePort dimensions: to be confirmed.\u003c\/li\u003e\n\u003cli\u003eListed tuning frequency: 33 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConfirm the enclosure's outside dimensions and weight with TrueBass Solutions to check vehicle fit and mounting requirements.\u003c\/li\u003e\n\u003cli\u003eMatch the amplifier to the confirmed power handling and final wiring impedance.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions for slot-port measurements or help planning placement and installation clearance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42708514373730,"sku":"TRIP8ULTRA","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/7.jpg?v=1775763894"},{"product_id":"quad-ultra-8","title":"Quad 842 DV Ultra","description":"\u003cp\u003ePlan your next vehicle audio build around the TrueBass Solutions Quad Ultra 8\". This listing includes four TBS 842DV Ultra 8-inch subwoofers in an enclosure measuring 35 × 25 × 14 inches externally, with listed enclosure tuning of 33 Hz and port dimensions of 21.5 × 32 × 2.2 inches.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing a truck or SUV setup or assembling a new bass system, start with the enclosure's fit and the supporting equipment. A multi-woofer build needs compatible amplification, appropriate wiring and enough installation clearance. Review the specifications below when planning your installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofer Configuration:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFour TBS 842DV Ultra 8-inch subwoofers in an enclosure\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOutside Enclosure Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e35 × 25 × 14 inches.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 12 lbs per woofer, including its magnets.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 160 oz per woofer (2 × 80 oz magnets per woofer). The magnets are included in each woofer's weight, not added on top. These are component weights, not the total enclosure-system weight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBox Impedance:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 ohms for the complete system.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1,200 watts RMS \/ 2,400 watts peak for the complete four-woofer system, not per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoice-coil inside diameter: 2 inches.\u003c\/li\u003e\n\u003cli\u003eSensitivity: 91 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts \u0026amp; Tuning:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePort dimensions: 21.5 × 32 × 2.2 inches.\u003c\/li\u003e\n\u003cli\u003eListed enclosure tuning frequency: 33 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eListed Acoustic Parameters:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDriver Fs (free-air resonance frequency): 45 Hz\u003c\/li\u003e\n\u003cli\u003eQt: 0.35\u003c\/li\u003e\n\u003cli\u003eVas: 1.4 cubic feet\u003c\/li\u003e\n\u003cli\u003eF3: 50 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCheck the outside enclosure dimensions against your available space and installation clearance.\u003c\/li\u003e\n\u003cli\u003eConfirm total system weight.\u003c\/li\u003e\n\u003cli\u003eMatch your amplifier to the system impedance.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details and amplifier information for help planning placement and installation clearance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42708526628962,"sku":"Q8ULTRA","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/quad-ultra-8-inch-enclosure-background-cleanup.png?v=1791561774"},{"product_id":"dual-12-system","title":"Dual 12\" System 2TBS 1243 DV ULTRA","description":"\u003cp\u003ePlan a dual-woofer bass upgrade with the TrueBass Dual 12-inch System, featuring two TBS 1243 DV ULTRA woofers. Designed for trucks, SUVs, and large vehicle audio builds, this configuration gives the low end of your music a dedicated place in your setup.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing an existing system or starting a new build, begin with the space available and the amplification you intend to use. Match the enclosure, wiring, and amplifier before installation so your next drive starts with a setup planned around your vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofers\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo TBS 1243 DV ULTRA 12-inch woofers.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBox Impedance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 \/ 2 ohms for the complete system.\u003c\/li\u003e\n\u003cli\u003eMatch your amplifier to the system impedance and intended wiring configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak)\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1,200 watts RMS \/ 2,800 watts peak for the complete two-woofer system, not per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMagnet Weight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMagnet weight: 180 oz per woofer (1 × 180 oz magnet). This component weight is included in the total finished product weight, not added on top.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e76 lbs, including the enclosure, woofers, magnets, and hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e32 inches wide × 16 inches high × 14 inches deep.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3.2 cu. ft. gross internal volume for the complete enclosure, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo slotted ports.\u003c\/li\u003e\n\u003cli\u003ePort dimensions: to be confirmed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompare the enclosure's outside dimensions with your available vehicle space, allowing room for mounting and wiring clearance.\u003c\/li\u003e\n\u003cli\u003eConfirm enclosure tuning and port dimensions.\u003c\/li\u003e\n\u003cli\u003eConfirm the final wiring impedance and connection details for your installation.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space, and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42861029720162,"sku":"DUAL1243","price":940.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/45.2.jpg?v=1778087693"},{"product_id":"dual-12-system-tbs-1243-2-dv-ultra","title":"Dual 12\" System - TBS 1243.2 DV Ultra","description":"\u003cp\u003e\u003cstrong\u003eComing soon. Not available to order yet.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBuild your vehicle's bass setup around the TrueBass Dual 12-inch System, featuring two TBS 1243.2 DV Ultra woofers. Designed for trucks, SUVs, and dedicated vehicle audio builds, this dual-woofer configuration gives the low end of your music its own place in your system.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing an existing setup or planning a new installation, start with fit and compatible amplification. Picture your next drive with a dedicated pair of 12-inch woofers handling the bass, supported by wiring and placement planned around your vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofers\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo TBS 1243.2 DV Ultra 12-inch woofers.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBox Impedance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 \/ 2 ohms for the complete system.\u003c\/li\u003e\n\u003cli\u003eMatch your amplifier to the system impedance and intended wiring configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak)\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1,500 watts RMS \/ 3,200 watts peak for the complete two-woofer system, not per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMagnet Weight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMagnet weight: 320 oz per woofer (2 × 160 oz magnets). This is the combined magnet weight for each woofer, not the total woofer or system weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSystem weight: to be confirmed. Contact TrueBass Solutions for the current weight before planning handling and mounting.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e32 inches wide × 16 inches high × 14 inches deep.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3.2 cu. ft. gross internal volume for the complete enclosure, before woofer and port deductions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo slotted ports.\u003c\/li\u003e\n\u003cli\u003ePort dimensions: to be confirmed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompare the enclosure's outside dimensions with your available vehicle space, allowing room for mounting and wiring clearance.\u003c\/li\u003e\n\u003cli\u003eConfirm enclosure tuning and port dimensions.\u003c\/li\u003e\n\u003cli\u003eConfirm the final wiring impedance and connection details for your installation.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space, and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42861070516322,"sku":"DUAL1243.2","price":1200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/45.2_7f6d8343-c0e2-4a9a-b37a-e00092ce74ab.jpg?v=1778088320"},{"product_id":"dual-15-system-tbs-1543-dv-ultra","title":"Dual 15\" System - TBS 1543 DV Ultra","description":"\u003cp\u003eBuild a dedicated bass setup around the TrueBass Dual 15-inch System, featuring two TBS 1543 DV Ultra woofers. Designed for trucks, SUVs, and large vehicle audio applications, this dual-woofer configuration gives the low end of your music its own place in your system.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing an existing installation or planning a new build, start with the space available and compatible amplification. Picture your next drive with a pair of 15-inch woofers handling the bass, supported by placement, mounting, and wiring planned around your vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofers\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo TBS 1543 DV Ultra 15-inch woofers.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBox Impedance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 \/ 2 ohms.\u003c\/li\u003e\n\u003cli\u003eConfirm the complete system's final wiring impedance before selecting an amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak)\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1,300 watts RMS \/ 2,800 watts peak for the complete two-woofer system, not per woofer.\u003c\/li\u003e\n\u003cli\u003ePeak handling is not a continuous-power rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDriver Parameters\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFree-air resonance frequency (Fs): 30 Hz.\u003c\/li\u003e\n\u003cli\u003eQt: 0.42.\u003c\/li\u003e\n\u003cli\u003eQes: 0.49.\u003c\/li\u003e\n\u003cli\u003eQms: 3.11.\u003c\/li\u003e\n\u003cli\u003eVas: 3.58 cu. ft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMagnet Weight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMagnet weight: 180 oz per woofer (1 × 180 oz magnet). This component weight is included in the total finished product weight, not added on top.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTotal Finished Product Weight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e78 lbs, including the enclosure, woofers, magnets, and hardware.\u003c\/li\u003e\n\u003cli\u003ePlan suitable handling and secure mounting for your installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTo be announced.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTo be announced.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo slotted ports.\u003c\/li\u003e\n\u003cli\u003ePort dimensions: to be confirmed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRequest the enclosure's outside dimensions to check vehicle fit, mounting space, and wiring clearance.\u003c\/li\u003e\n\u003cli\u003eConfirm enclosure tuning and port dimensions.\u003c\/li\u003e\n\u003cli\u003eConfirm the final wiring impedance and connection details for your installation.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space, and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42861098762338,"sku":"DUAL1543","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/45.2_cd6747ee-27ad-469e-b934-32171f85013c.jpg?v=1778088646"},{"product_id":"dual-15-system-tbs-1543-2-dv-ultra","title":"Dual 15\" System - TBS 1543.2 DV Ultra","description":"\u003cp\u003ePlan a dedicated bass upgrade with the TrueBass Dual 15-inch System, featuring two TBS 1543.2 DV Ultra woofers. Designed for trucks, SUVs, and large vehicle audio applications, this dual-woofer configuration gives the low end of your music its own place in your setup.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing an existing system or starting a new build, picture your next drive with a pair of 15-inch woofers handling the bass. Begin with your available installation space, then plan compatible amplification, wiring, and secure mounting around your vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoofers\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwo TBS 1543.2 DV Ultra 15-inch woofers.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice-Coil Inside Diameter\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3 inches per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eListed dual voice-coil impedance: 2 ohms \/ 2 ohms.\u003c\/li\u003e\n\u003cli\u003eConfirm the complete system's final wiring impedance before selecting an amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak)\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1,500 watts RMS \/ 3,200 watts peak for the complete two-woofer system, not per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMagnet Weight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMagnet weight: 320 oz per woofer (2 × 160 oz magnets). This is the combined magnet weight for each woofer, not the total woofer or system weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSystem weight: to be confirmed. Contact TrueBass Solutions for the current weight before planning handling and mounting.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTo be announced.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInternal Enclosure Volume\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTo be announced.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePorts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo slotted ports.\u003c\/li\u003e\n\u003cli\u003ePort dimensions: to be confirmed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRequest the enclosure's outside dimensions to check vehicle fit, mounting space, and wiring clearance.\u003c\/li\u003e\n\u003cli\u003eConfirm enclosure tuning and port dimensions.\u003c\/li\u003e\n\u003cli\u003eConfirm the final wiring impedance and connection details for your installation.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space, and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":42861121470562,"sku":"DUAL1543.2","price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/45.1_abe5b018-466d-4b8a-8057-311cc25397af.jpg?v=1778089121"},{"product_id":"jeep-commander-box","title":"Jeep Commander Box","description":"\u003cp\u003ePlan a dedicated bass upgrade for your 2006–2010 Jeep Commander with this TrueBass enclosure, featuring a single TBS 1041.5 driver. This listing includes the enclosure and woofer only; an amplifier is not included. Its listed dimensions give you a starting point for checking placement and available space before building the rest of your audio setup around it.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing your daily driver's sound or replacing an existing enclosure, picture your next drive with a dedicated woofer handling the low end of your music. Check vehicle fit, amplifier compatibility, and the connection requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDriver \u0026amp; Application\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne TBS 1041.5 driver.\u003c\/li\u003e\n\u003cli\u003eDesigned for 2006–2010 Jeep Commander models. Confirm your planned mounting location and available space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVoice Coil \u0026amp; Impedance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoice-coil inside diameter: 1.5 inches per woofer.\u003c\/li\u003e\n\u003cli\u003eVoice-coil configuration: single 4-ohm voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 5.5 lbs, including the magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 40 oz per woofer (1 × 40 oz magnet). These component weights are included in the total system weight, not added on top.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSensitivity \u0026amp; Driver Parameters\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSensitivity: 92 dB.\u003c\/li\u003e\n\u003cli\u003eFree-air resonance frequency (Fs): 42 Hz. This is a driver parameter, separate from enclosure resonance or port tuning.\u003c\/li\u003e\n\u003cli\u003eQms: 4.39.\u003c\/li\u003e\n\u003cli\u003eQes: 0.45.\u003c\/li\u003e\n\u003cli\u003eQt: 0.41.\u003c\/li\u003e\n\u003cli\u003eVas: 1.7 cubic feet. This is a driver parameter, not the enclosure volume.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRMS power handling: 150 watts.\u003c\/li\u003e\n\u003cli\u003ePeak power handling: 300 watts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure \u0026amp; Dimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 16 inches high × 37.5 inches wide × 8.25 inches deep at the bottom × 5 inches deep at the top.\u003c\/li\u003e\n\u003cli\u003eTotal system weight: 35 lbs.\u003c\/li\u003e\n\u003cli\u003eListed acoustic volume: 0.75 cubic feet.\u003c\/li\u003e\n\u003cli\u003eListed cabinet material: MDF.\u003c\/li\u003e\n\u003cli\u003eEnclosure type: ported.\u003c\/li\u003e\n\u003cli\u003ePort: one, 3 inches in diameter × 18 inches long.\u003c\/li\u003e\n\u003cli\u003ePort-tuning frequency: 35 Hz.\u003c\/li\u003e\n\u003cli\u003eF3: 36 Hz.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIncluded Components \u0026amp; Connections\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnclosure and woofer only. Amplifier not included.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty binding posts for speaker-level connection.\u003c\/li\u003e\n\u003cli\u003eUse a compatible external amplifier and match the final wiring impedance to its supported load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompare the full enclosure dimensions with your vehicle's available space, allowing clearance for wiring and secure mounting.\u003c\/li\u003e\n\u003cli\u003eConfirm the electrical connection and wiring requirements.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your Jeep Commander's model year, available space, and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":43344062087266,"sku":"Jeep Commander","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/Jeep-Commander-front-ec3c89f3.png?v=1791561630"},{"product_id":"quad-842dv","title":"Quad 842DV","description":"\u003cp\u003ePlan your next truck or SUV bass build with the TrueBass Quad 842DV, an enclosure with four 8-inch 842DV subwoofers included.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing an existing installation or starting a custom setup, picture your favorite tracks with four subwoofers handling the low end. Check the enclosure's outside dimensions against your available space and confirm compatible amplification and wiring before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne enclosure with four 842DV subwoofers.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eListed Driver Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDriver model: 842DV.\u003c\/li\u003e\n\u003cli\u003eNominal driver size: 8 inches.\u003c\/li\u003e\n\u003cli\u003eVoice-coil inside diameter: 2 inches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWoofer \u0026amp; Magnet Weight\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTotal woofer weight: 8 lbs per woofer, including its magnet.\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 80 oz per woofer (1 × 80 oz magnet per woofer). The magnets are included in each woofer's weight, not added on top. These are component weights, not the total enclosure-system weight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Handling (RMS \/ Peak)\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1,000 watts RMS \/ 2,000 watts peak for the complete four-woofer system, not per woofer.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSystem Impedance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2 \/ 2 ohms.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAcoustic Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eListed sensitivity: 90 dB.\u003c\/li\u003e\n\u003cli\u003eListed driver resonance frequency: 42 Hz.\u003c\/li\u003e\n\u003cli\u003eVas: 1.3 cubic feet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure \u0026amp; Ports\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside enclosure dimensions: 35 × 25 × 14 inches.\u003c\/li\u003e\n\u003cli\u003ePort dimensions: 21.5 × 32 × 2.2 inches.\u003c\/li\u003e\n\u003cli\u003eConfirm enclosure tuning frequency.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCheck the outside enclosure dimensions against your available space and installation clearance.\u003c\/li\u003e\n\u003cli\u003eConfirm total weight, connections, and amplifier compatibility with the system impedance.\u003c\/li\u003e\n\u003cli\u003eRequest the recommended enclosure volume and sensitivity measurement conditions. Vas is an acoustic parameter, not a recommended enclosure volume.\u003c\/li\u003e\n\u003cli\u003eContact TrueBass Solutions with your vehicle details, available space, and amplifier information for help planning your setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TrueBass Solutions","offers":[{"title":"Default Title","offer_id":50619097251938,"sku":"Quad 842DV","price":774.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/files\/cleaned-up-quad-842dv-product-photo.png?v=1791567748"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/3794\/9282\/collections\/cleaned-up-quad-842dv-product-photo.png?v=1792169601","url":"https:\/\/truebass.solutions\/collections\/loaded-subwoofer-enclosures.oembed","provider":"TrueBass Solutions","version":"1.0","type":"link"}